Enter Email


Advertise in MotionControl.com

Motion Controller

MCST 3601 - Powerful Drive Electronics for Stepper Motors

FAULHABER MCST 3601 Motion Controller For Stepper Motors
 
Searching the multitude of available programmable motion controllers for one that is ideal for micro stepper motors with phase currents of sometimes less than 100 mA was once a real challenge. The new MCST 3601 series, developed from the cooperation between FAULHABER and Trinamic GmbH (the motion controller
specialist for stepper motors), offers the solution.

Tags: Motion Controller, Stepper Drive

Nippon Pulse announces new high-performance motion controller chip series with available 4-wire SPI interface

Nippon Pulse PCL61x4 high-performance motion controller chip series with available 4-wire SPI interface

 

Nippon Pulse has released its newest series of motion controller chips, the PCL61x4 Series. PCL61x4 is a series of two high-performance servo/stepper controller chips: the PCL6114 singleaxis chip and the four-axis PCL6144 chip. The PCL61x4 series has some improved features over the PCL61x3 series, a similar chip series in the Nippon Pulse family of products.

Tags: Motion Controller

2-Axis Standalone Motion Controller with Driver PMX-2ED-SA

2-Axis Standalone Motion Controller with Driver PMX-2ED-SA from Arcus Technology

 

The PMX-2ED-SA is a 2-axis USB motion controller with built in micro-step drivers. It is also possible to download a standalone program to the device and run independent of a host. Because of its ability to perform closed-loop motion with analog joystick control, it is ideal for high precision stage positioning applications.

Tags: Motion Controller, Stepper Drive

CUI 90 A Digital Point-of-Load Module Series to Address Growing Challenge of Powering Advanced ICs

CUI NDM3Z-90 a 90 A Digital Point-of-Load (POL) Module Series to Address Growing Challenge of Powering Advanced ICs

 

Highest Current POL on the Market Meets Rising Power Demands in Networking Applications. CUI Inc released its highest current digital POL family to date from the Applied Power Electronics Conference (APEC) in Charlotte, North Carolina. Designed specifically to address the rapidly-rising power requirements of today’s most advanced integrated circuits, the NDM3Z-90 is a non-isolated module outputting 90 A in ultra low-profile vertical and horizontal packages.

Tags: Motion Controller, Integrated Circuit, Power

ACE-SDE Product Spotlight

ACE-SDE Product Spotlight from Arcus Technology
 
The Arcus ACE-SDE is an easy to use, stand-alone controller plus driver with USB/RS-485 and Modbus-RTU communication.  This product in the ACE family provides a drop-in stepper solution for PLC/PC-based or stand-alone systems at an affordable price.

Tags: Motion Controller, Motor Control

CANopen made easy - Simplify drives applications using SUN CANopen Master

CANopen made easy - Simplify drives applications using SUN CANopen Master from Ingenia Motion Control
 
The Sun CANopen Master Controller is a standalone network motion controller that provides real-time synchronization for the most demanding systems, bringing your single and multi-axis equipment to the highest level of performance it can achieve. Sun is based on an embedded single board computer with a customized Linux OS, specifically tuned for real time applications. This means that expert user can further customize the platform and extend its capabilities.

Tags: Motion Controller

AMCI Webinar Explains PLC Based Stepper Motion Control Basics

AMCI Webinar Explains PLC Based Stepper Motion Control Basics
 
Advanced Micro Controls Inc. (AMCI), recently sponsored an educational webinar describing the basics of PLC-based stepper motion control. The webinar was hosted by The Journal from Rockwell Automation and explained the basic parts of a stepper system, how they integrate with PLCs, and how they compare with servos. Other stepper related topics included EtherNet/IP™, applications and case studies.

Tags: Motion Controller, Stepper Motor

SSI Interface for Networked PLCs

SSI Interface for Networked PLCs from Advanced Micro Controls Inc. (AMCI)
 
Advanced Micro Controls Inc. (AMCI), announces the addition of their ANE2 SSI Interface Module to the AnyNET I/O family of PLC-based specialty I/O products.  AMCI’s AnyNET SSI Interface integrates a network connection and expansion capabilities to provide a modern, versatile SSI feedback solution for any PLC-based system.  The ANE2 expands up to six 2-channel modules, allowing users to interface up to 12 SSI sensors using a single network connection.

Tags: Motion Controller, Programmable Logic Controller PLC

MAXPOS 50/5 Positioning Controller - The next generation of high-performance positioning controllers

MAXPOS 50/5 Positioning Controller - The next generation of high-performance positioning controllers from Maxon Precision Motors
 
maxon motor launches the MAXPOS 50/5. This compact EtherCAT Slave unveils unprecedented possibilities as far as precision, dynamics, and synchronization are concerned. It also ensures reliability and durability even under harsh conditions. More than 20 years of experience in motion control have been incorporated into this latest technology in positioning controller.

Tags: EtherNet IP, Motion Controller, Motor Control

New Compact Advanced Motion Controller

FMC200 series Compact Advanced Motion Controller from Steinmeyer, Inc.

Steinmeyer, Inc. announced a small new point to point controller to complement its line of precision linear stages. The new FMC200 series controller offers a compact design that is able to support a wide range of motors including Linear Brushless, DC Brush and Stepper Motors.  Up to 3 axes can be controlled from a single unit that measures only 100x100x25 mm.

Tags: Motion Controller

Company Directory

Search by Company Name A-Z
A B C D E F G H I
J K L M N O P Q R
S T U V W X Y Z #


Advertise in MotionControl.com