Enter Email


Advertise in MotionControl.com

Mechanical Component

Integrated Rack Range will mount directly to most Linear Guide Rails

Integrated Rack Range from Atlanta Drive Systems

ATLANTA Drive Systems, Inc. offers a range of Integrated Racks which mount directly to most standard linear guide rails, eliminating the need for additional machining and alignment, saving time and money. Compact, performance optimized designs can easily be achieved with these racks. By mounting the rack and rail together, the need for a separate mounting surface for the rail is eliminated.

Tags: Linear Motion, Mechanical Component

Robotic Joint Solutions from igus

Robolink Robotic Joint Solutions from igus

igusRobolink is a lightweight, maintenance and corrosion-resistant range of robotic joints for humanoid systems or other automated applications. The system is compact, offering multiple axes and degrees of freedom. Using Robolink, pressure is converted to tensile forces via cables, which mimic biological sinews. When compared to steel, Robolink is lower priced, and more energy efficient. A variety of drive/control systems are possible.

Tags: Cable, Robotics, Mechanical Component

COUNTEX Easy as 1-2-3 Three-piece, double cardanic Coupling

COUNTEX Easy as 1-2-3 Three-piece, double cardanic Coupling from KTR Corporation
 
COUNTEX® is a three-piece, torsionally stiff coupling which was specifically developed for the zero backlash demands of measuring  and control applications. The double-cardanic operating principle of COUNTEX® minimizes the restoring forces in a compact design ideal for ac-comodating large shafts and short DBSEs.
Tags: Couplings, Mechanical Component

ServoClass Couplings feature Fail Safe Clamping Hubs

ServoClass® Couplings feature Fail Safe Clamping Hubs
 
ServoClass Couplings from Zero-Max feature fail safe clamping hubs that provide maximum torque transmission in high speed applications. Without the use of keyways, ServoClass Couplings are designed, manufactured and tested to provide superior shaft engagement in servo motor applications at speeds up to 10,000 rpm.

Tags: Couplings, Mechanical Component

Inertia Dynamics Spring Applied Brakes for Servo and Stepper Motors

Inertia Dynamics Spring Applied Brakes for Servo and Stepper Motors
 
SAB brakes from Inertia Dynamics are designed to be engaged and disengaged in a static condition at zero RPM. They are best used as a parking brake to hold a load in position. These brakes can be mounted to a flange or motor using thru-holes or tapped holes in the field cup. A conduit box is optional. SAB brakes have been used extensively for servo brake applications. High temperature coil insulations are available upon request.

Tags: Brakes Clutches, Mechanical Component

New Miniature Vibration Damping Drive Shaft - EZ2/5

Miniature Vibration Damping Drive Shaft - EZ2/5 from R+W America
 
R+W has expanded upon its proven design of vibration damping drive shafts, series EZ2, with a new miniature design, size 5.  The new size 5 shafts feature customer specified lengths and bore diameters, along with fully split clamping hubs for easy drop-in mounting.  Speeds in excess of 5000 rpm can be achieved without any intermediate support bearings required.

Tags: Couplings, Mechanical Component

New Miniature Vibration Damping Drive Shaft - EZ2/5

EZ2/5 Miniature Vibration Damping Drive Shaft from R+W America
 
R+W has expanded upon its proven design of vibration damping drive shafts, series EZ2, with a new miniature design, size 5.  The new size 5 shafts feature customer specified lengths and bore diameters, along with fully split clamping hubs for easy drop-in mounting.  Speeds in excess of 5000 rpm can be achieved without any intermediate support bearings required.

Tags: Couplings, Mechanical Component

igus Launches 2015 manus competition for creative bearing applications

igus Launches 2015 manus competition for creative bearing applications
 
A for agricultural machinery, B is for baking equipment, C is for cross trainer – over 400 unique applications for plastic plain bearings were entered into the 2013 Manus competition, and now the search continues. The application phase for the 2015 manus competition is now underway, continuing through February 20th, and awards of up to €5,000 will be presented at April’s Hanover Trade Show in Germany.

Tags: Bearings, Mechanical Component

High Performance Squirrel Cage Rotor Castings

High Performance Squirrel Cage Rotor Castings from Arc Systems, Inc
 
ARC Systems, Inc. offers High Performance Squirrel Cage Rotor Castings available as raw castings or machined on a shaft.  ARC’s unique casting technique allows these custom fabricated rotor castings to be manufactured using various types of alloys.

Tags: Motors, Mechanical Component

Strong Line Class of Gear Racks

Strong Line Class of Gear Racks from Atlanta Drive Systems
 
ATLANTA Drive Systems offers a class of precision gear racks which offer several significant advantages over traditional gear racks. The "Strong Line" class of gear racks from ATLANTA utilizes an innovative carburized case-hardening process to increase the strength of the rack, including the tooth flanks and root, which maximizes its power density, stiffness and performance.

Tags: Gearhead, Mechanical Component

Company Directory

Search by Company Name A-Z
A B C D E F G H I
J K L M N O P Q R
S T U V W X Y Z #


Advertise in MotionControl.com