Electronic Component
Energy Efficient Air Curtain from TelcoMotion
TelcoMotion, an international provider of electric motors and electronic components, announces a new air curtain with EC (electronically commutated) technology for greater energy efficiency. The new air curtain is designed for industrial and commercial entries, such as supermarkets, factories, warehouses, large cold store areas, food preparation areas, etc… Consuming only 60W~95W with common AC input, it offers 58~65% more energy savings compared to air curtains using conventional motors. |
Universal, digital sensor output driver with sensor supply
Universal, digital output driver iC-DX/DXC enables compact sensors to be assembled with NPN, PNP, push-pull, and IO link-compatible output driver options. From an input voltage of 8 to 30 V an integrated linear regulator provides the sensor electronics with a stable 5 V voltage with a 10 mA carrying capacity. |
Space Level Die and High Reliability Die Products
Sensitron offers a large selection of Die Products including rectifier die, tvs die, zener die, schottky die, and small signal switching die that have been used in space and high-reliability applications for more than 40 years. Our preferred parts list contains many standard voltages from 6.8 volt to 1000 volt die. Sensitron can perform Lot Acceptance Testing (LAT) in our JANS qualified facility, to the process flow following MIL-PRF-19500 Class H and Class K. |
All-purpose laser diode driver – Driving laser diodes from CW to 155 MHz with power or current control
The all-purpose laser diode drivers iC-NZN and iC-NZP operate laser diodes in both CW and spike-free pulse mode with up to 155 MHz. The devices allow either the optical output power (APC) or laser diode current (ACC) to be controlled. In ACC mode also laser diodes without monitor diodes can be used. Blue laser diodes can also be operated with iC-NZN. The maximum available laser diode current is 300 mA. The devices have an adjustable current limit. |
Temperature IGBT Three Phase Bridge 1200V 40A 175 degrees C
Sensitron now offers a high temperature 1200V, 40A IGBT three phase bridge. These high temperature bridges can operate up to 175ºC junction temperature, and are ideal for use in high reliability power supplies, AC to DC conversion, and applications where tight parameter distribution is a requirement. Typical motor control applications include use in military aircraft and combat systems, and motors in pumps, fans, blowers, compressor and servo amplifiers. |
LD200 is the new Display joining the Lika POSICONTROL range
The major innovation of LD200 universal display is the possibility to connect every kind of transducer. The LD200 can be connected to:
LD200 features include: |
Easy Encoder Verification with US Digitals QSB
Vancouver, WA - US Digital is pleased to announce the release of its latest encoder interface device, the QSB (Quadrature to USB) adapter. Encoder verification is made easy with the QSB, which allows easy interface of standard quadrature encoder signals into a PC USB port. Single ended (QSB-S) or differential (QSB-D) encoder versions are available. The QSB-M version supports single ended encoder input, digital I/O and step/direction motion control output. Each QSB comes with full featured demonstration software and source code at no additional cost. |
iC MFL 8 channel fail safe FET driver with AEC Q100 qualification by iC Haus
iC-MFL is a monolithically integrated, 8-channel level shifter to drive Logic FETs. The internal circuit blocks have been designed in such a way that with single errors, such as open pins or the short-circuiting of two outputs, the iC-MFL output stages switch to a predefined, safe state. Externally connected FETs therefore shut down safely in the event of a single error. The device is now qualified for typical SIL/ASIL applications according to AEC Q100. |
iC MZ Differential Hall Switch for Position Sensing
SPS/IPC/DRIVES 2010, iC-Haus, Stand 6-426 |
iC TW2 compact interpolator with integrated EEPROM from iC Haus
Chip incremental encoder for motor commutation and way or angle measurement. |





















