No Need for External Controllers: High Load Linear Stages with built-in controllers
Zaber’s T-LST High-Load Linear Stages have a 100 kg load capacity and are available in travel ranges from 254 mm to 1500 mm. They have built-in controllers and drivers, so no external control boxes are required. Set up is as easy as 1-2-3.
The T-LST series products are computer controlled motorized linear stages with a variety of lead screw pitches and travels. They are stand-alone units requiring only a standard 48V power supply.
A potentiometer knob at the end of the unit permits smooth manual control; turn it fully to get maximum speed. The stages connect to the RS-232 port of any computer and can be chained with up to 254 units per chain. They can also be chained with any other T-Series products. Convenient 6-pin mini din cables on the unit allow for direct interconnection between units in close proximity. For longer distances, standard cable extension can be used.
• 254, 500, 750, 1000, 1500 mm travel
• 100 kg load capacity
• Up to 420 mm/s and up to 560 N thrust
• Built-in controller; daisy chains with other T-series products
• Mount directly in XY; requires an angle bracket to add a Z axis