The Ezi-STEP® Plus-R is an innovative, open loop stepping motor and motion control system which is suitable for low cost applications. A maximum of 16 axes can be operated from a PC through RS-485 communication and it can be connected to Ezi-SERVO® Plus-R, as well. All of the motion conditions are set through the network and are saved in flash ROM as a parameter. The Motion Library (DLL) is provided for programming under Windows 2000/XP. Position table is used for motion control by digital input and output signals of host controller. You can operate the motor directly by sending the position table number, start/stop, origin search and other digital input values from a PLC. The PLC can monitor the In-Position Status, Origin Search, Move/Stop, Servo Ready and other digital output signals from the drive. A maximum of 256 positions can be saved in flash ROM memory. Main Features are Sensor-less Stall (Step-out) Detection without external sensor, effective over 300 RPM, Software Damping (FASTECH minimizes step motor vibration at the low speed range without mechanical damper), Run/Stop Signal output, Driver built-in product to minimize wiring, size and space.

Ezi-STEP®Plus-R is available in standard NEMA 17, 23 and 34 frames.